SV615 bronze screwed safety valve for small steam boilers and hot water cylinders

SV615 Safety Valve (Bronze, Screwed)

Bronze screwed safety valve for small steam and hot water plant - compact and economical

The SV615 is a bronze, screwed safety valve for small steam and hot water plant: package boilers, calorifiers, hot water cylinders, small receivers and steam-heated equipment. It is compact, inexpensive and available in the small sizes those duties use.

Bronze construction is appropriate for clean, non-corrosive steam and water at utility pressures, and the screwed connections allow it to be fitted directly to small vessels without adaptors.

Design and construction

Bronze body with a lapped stainless or bronze disc, a spring set and locked at the required pressure, and a lever for manual lifting. The screwed inlet and outlet suit small-bore pipework and direct mounting on the protected vessel.

Key features

  • Bronze body for clean steam and hot water service
  • Small sizes with screwed connections for direct mounting
  • Certified set pressure, locked at the works
  • Lever for periodic lifting test
  • Compact and economical for package plant
  • Clean reseat to avoid steam loss after discharge

Selection and sizing

Confirm the set pressure against the vessel’s design pressure and the discharge capacity against the heat input of the boiler or calorifier – a safety valve that is too small will not pass the required steam. Use bronze only for non-corrosive duties; for higher pressure or aggressive fluids move to the SV604 or SV607.

Installation and maintenance

Mount vertically, directly on the vessel where possible, with no valve between the vessel and the safety valve. Route the discharge safely and avoid any condensate pocket at the outlet. Lift-test at commissioning and record the set pressure.

Options and spare parts

Discs, springs and gaskets are available; the body is normally retained.

Request a Quote

Technical Specifications

Standard configurations. Custom materials, connections and special testing available on request.

ParameterSpecification
Product type Safety relief valve, bronze, screwed
Size range DN8 - DN25 (1/4" - 1")
Connections Screwed BSP or NPT
Body material Bronze
Set pressure Certified and locked, up to 10 bar
Media Steam, hot water
Testing Set pressure and seat test with certificate
Documentation Material certificate, set pressure certificate

Typical Applications

Steam & Fluid Control

Modulating control valves, actuators and positioners for accurate process control loops.

Pressure Management

Pressure reducing and safety relief valves protecting steam and compressed air systems.

Plant Automation

Electric and pneumatic actuation for remote and hazardous-area valve operation.

Related Control Systems

Compare more products in the same range.

Get SV615 Safety Valve (Bronze, Screwed) Pricing Today

Send us your size, class and material requirements - quotation within 24 hours.

Request a Quote