The DCV3 is a wafer-type disc check valve. A lightweight disc lifts off its seat with forward flow and closes as soon as flow stops or reverses, preventing backflow into a steam main, a condensate header or a pump discharge.
Its short face-to-face length and light disc make it the practical choice where space is limited and where a low cracking pressure is needed – trap discharges into a common return, pump outlets, and branch lines off a header.
Design and construction
Wafer body clamped between flanges, with a single disc and a short travel so that closure is quick and pressure loss stays low. There are no levers or springs in the basic version, so there is little to wear and nothing to maintain.
Key features
- Compact wafer design – very short face-to-face
- Low cracking pressure and low pressure loss
- Quick closure to limit reverse flow and water hammer
- Simple construction with few wearing parts
- Suitable for steam, condensate, water and air
- Clamped between flanges, no separate gaskets in most sizes
Selection and sizing
Size on line size with attention to velocity: an oversized check valve can chatter, an undersized one adds pressure loss. Confirm the medium, pressure class and whether the installation needs a spring-assisted closure for vertical up-flow.
Installation and maintenance
Install with the flow arrow in the direction of flow, and leave enough straight pipe upstream for the flow to settle. For vertical flow, confirm the valve closes against gravity – a spring-assisted type may be required.
Options and spare parts
Replacement discs and seats are available; the body is normally retained.