EP5 electro-pneumatic valve positioner for pneumatic control valves with 4-20 mA input

EP5 Electro-Pneumatic Positioner

Electro-pneumatic positioner - 4-20 mA input, precise valve positioning, fast commissioning

The EP5 is an electro-pneumatic positioner that converts a 4-20 mA controller signal into a pneumatic output to the actuator. It closes the loop on valve position rather than on air pressure, so stem friction, packing wear and supply variations no longer translate into control error.

Fitting a positioner is the single most effective upgrade on a pneumatically actuated control valve: it removes hysteresis and stick-slip, and it makes the valve respond to small signal changes that a bare actuator ignores.

Design and construction

Balanced beam or feedback potentiometer sensing the stem position, with a nozzle-flapper or piezo pilot stage and adjustable zero and span. Auto-calibration routines set the stroke ends in a few minutes, and the housing is sealed for plant environments.

Key features

  • 4-20 mA input with accurate stem position control
  • Removes actuator hysteresis and stick-slip
  • Auto calibration for fast commissioning
  • Adjustable zero and span
  • Split range and reverse action available
  • Sealed housing for indoor and outdoor plant

Selection and sizing

Specify the actuator it will be fitted to, the supply air pressure, the desired action (direct or reverse) and whether split range is needed. Confirm the input signal and any requirement for an I/P converter where only a pneumatic signal is available.

Installation and maintenance

Mount the positioner on the actuator with the feedback linkage correctly aligned, then run auto calibration before putting the loop in service. Use clean, dry instrument air – oil and water in the air line are the usual cause of positioner faults.

Options and spare parts

Feedback linkages, pilot assemblies and filter regulators are available as spares.

Request a Quote

Technical Specifications

Standard configurations. Custom materials, connections and special testing available on request.

ParameterSpecification
Product type Electro-pneumatic valve positioner
Input signal 4-20 mA
Air supply Filtered, dry instrument air
Action Direct or reverse, split range option
Calibration Automatic stroke calibration
Feedback Stem position (potentiometer / beam)
Protection Sealed industrial housing
Documentation Calibration record on request

Typical Applications

Steam & Fluid Control

Modulating control valves, actuators and positioners for accurate process control loops.

Pressure Management

Pressure reducing and safety relief valves protecting steam and compressed air systems.

Plant Automation

Electric and pneumatic actuation for remote and hazardous-area valve operation.

Related Control Systems

Compare more products in the same range.

Get EP5 Electro-Pneumatic Positioner Pricing Today

Send us your size, class and material requirements - quotation within 24 hours.

Request a Quote