25P pilot operated pressure reducing valve for steam pressure control up to 25 bar

25P Pilot Operated Pressure Reducing Valve

Pilot operated pressure reducing valve for steam - stable downstream pressure, high capacity

The 25P is a pilot operated pressure reducing valve for steam service, used to hold a steady downstream pressure irrespective of the flow drawn. The pilot senses downstream pressure and positions the main valve, so control remains accurate from full flow down to low demand.

It is the standard valve for let-down stations: reducing a 10 to 25 bar g main to 3 to 5 bar g for process equipment, heaters, tracing or a low pressure distribution network.

Design and construction

Main valve with a pilot valve mounted on the body, an adjusting screw for set pressure and a strainer protecting the pilot. The main valve seat is lapped for tight closure, and the diaphragm separates the steam from the adjusting spring.

Key features

  • Accurate downstream pressure across the flow range
  • High capacity for its size
  • Tight closure at zero demand
  • Set pressure adjustable on site
  • Replaceable pilot and main valve internals
  • Can be supplied as a complete reducing station

Selection and sizing

Size on maximum flow at minimum inlet pressure, then check control quality at minimum flow. Confirm inlet and outlet pressures, capacity in kg/h, and the steam condition. Always install a safety valve downstream to protect equipment rated below the inlet pressure.

Installation and maintenance

Install with a separator and strainer upstream, a safety valve downstream and pressure gauges either side. Provide isolating valves and a bypass. Commission by setting the downstream pressure under normal load, then check it at low load to confirm the valve holds.

Options and spare parts

Pilot assemblies, main valve seats, diaphragms and springs are available as spares.

Request a Quote

Technical Specifications

Standard configurations. Custom materials, connections and special testing available on request.

ParameterSpecification
Product type Pilot operated pressure reducing valve
Size range DN15 - DN50 (1/2" - 2")
Connections Flanged EN 1092 PN25 or screwed
Body material Ductile iron / cast iron
Max inlet pressure 25 bar g
Downstream range Adjustable, typically 0.2 - 17 bar g
Media Saturated steam
Options Safety valve, separator, strainer, gauges
Documentation EN 10204 3.1 material certificate

Typical Applications

Steam & Fluid Control

Modulating control valves, actuators and positioners for accurate process control loops.

Pressure Management

Pressure reducing and safety relief valves protecting steam and compressed air systems.

Plant Automation

Electric and pneumatic actuation for remote and hazardous-area valve operation.

Related Control Systems

Compare more products in the same range.

Get 25P Pilot Operated Pressure Reducing Valve Pricing Today

Send us your size, class and material requirements - quotation within 24 hours.

Request a Quote