FT43 cast iron ball float steam trap for steam mains and process duties

FT43 Cast Iron Ball Float Steam Trap

Cast iron ball float steam trap for steam mains, drip legs and process equipment up to 13 bar g

The FT43 is a cast iron ball float steam trap for steam distribution mains, drip legs, tracing lines and general process equipment. It discharges condensate continuously and proportionally to the load, which is what keeps a steam main dry and a heat exchanger at full rating.

Cast iron construction makes it the economical choice for plant utility steam up to about 13 bar g where the condensate is clean and the duty is steady. It is the trap most often specified as a like-for-like replacement on existing FT43 and FT14 installations.

Design and construction

Cast iron body with bolted cover, float-operated lever mechanism and a replaceable discharge seat. The float chamber is arranged so that dirt and scale settle away from the orifice, and the cover can be removed for cleaning without disturbing the pipework.

Key features

  • Continuous condensate discharge at steam temperature
  • Cast iron body – economical choice for utility steam mains
  • Bolted cover for cleaning and orifice inspection
  • Modulating discharge copes with wide load swings
  • Replaceable seat and valve plug keep the body in service for decades
  • Available with screwed or flanged connections

Selection and sizing

Use the FT43 on clean condensate duties up to 13 bar g. For higher pressure, higher temperature or dirty condensate, move to the carbon steel FT44 or a thermodynamic trap. Size on the condensate load and the minimum differential pressure; for steam mains allow for the condensate picked up at start-up, which can be several times the running load.

Installation and maintenance

Fit the trap at the low point of the main or at the end of a drip leg, with a strainer and a sight glass. Do not lift condensate directly into a return main without checking the back pressure – if the lift exceeds the available differential, use a pump trap. The trap must be able to drain fully; a partially flooded chamber will hold the float up and pass steam.

Options and spare parts

Seats, valve plugs, float and lever assemblies and cover gaskets are available as spares for all sizes.

Request a Quote

Technical Specifications

Standard configurations. Custom materials, connections and special testing available on request.

ParameterSpecification
Product type Ball float steam trap
Size range DN15 - DN50 (1/2" - 2")
Connections Screwed BSP or NPT; flanged EN 1092 PN16
Body material Cast iron
Max operating pressure (PMA) 13 bar g
Max operating temperature (TMA) 200 °C
Internals Stainless steel float and lever; replaceable seat
Testing Shell and seat test to EN 12266
Documentation EN 10204 3.1 material certificate
Options Strainer, sight glass, drain cock, insulation jacket

Typical Applications

Steam Mains & Drainage

Continuous condensate drainage for distribution mains, drip legs and tracing lines that protects steam quality.

Process Equipment

Automatic condensate removal for heat exchangers, jacketed pans, autoclaves and process vessels.

Clean Steam & HVAC

Condensate drainage for hygienic, pharmaceutical and building-services steam systems.

Related Steam Traps

Compare more products in the same range.

Get FT43 Cast Iron Ball Float Steam Trap Pricing Today

Send us your size, class and material requirements - quotation within 24 hours.

Request a Quote