The Fig 12 is a Y-type strainer. Steam, condensate, water or air passes through a cylindrical screen that traps dirt, scale and weld slag, and the collected debris sits in the Y-leg where it can be blown down or removed.
Every trap, control valve, meter and pump benefits from a strainer immediately upstream. Dirt in a trap orifice or under a valve seat is the most common cause of the failures that get blamed on the equipment.
Design and construction
Body with a Y-shaped screen housing, a perforated or mesh screen in monel or stainless steel, and a blowdown plug at the leg. The screen can be removed for cleaning without cutting the pipework.
Key features
- Replaceable screen in monel or stainless steel
- Blowdown plug for cleaning without dismantling
- Low pressure loss at design flow
- Protects traps, control valves and meters
- Available with flanged or screwed connections
- Suitable for steam, condensate, water and air
Selection and sizing
Select the mesh on the particle size to be removed: steam traps usually need a finer screen than a general line strainer. Size the body on line size and check the pressure loss at maximum flow. Confirm the pressure class and connection standard.
Installation and maintenance
Install with the screen leg downwards so debris collects at the blowdown point, immediately upstream of the equipment it protects. Blow down regularly – a clogged screen causes the very pressure loss it was installed to prevent.
Options and spare parts
Replacement screens, gaskets and blowdown plugs are available in a range of meshes.