A clean steam generator produces steam from demineralised or purified water using plant steam or another heat source, so the steam that reaches the process contains no boiler chemicals, no carryover and no pyrogens. It is the steam source for sterilizers, autoclaves, humidification in clean areas, SIP systems and pharmaceutical process equipment.
The distinction matters in regulated manufacturing: plant steam is treated with chemicals and generated in a boiler that is not designed for product contact. Clean steam is generated in a stainless exchanger from water that is already pure, and the two circuits never mix.
Design and construction
Stainless steel evaporator with a demineralised water circuit, plant steam or electric heating on the primary side, a level control system, a separator for dry steam and a condensate drain on the primary side. Surfaces in contact with clean steam are stainless and accessible for inspection.
Key features
- Pyrogen-free steam from purified or demineralised water
- Separate primary and clean steam circuits – no cross contamination
- Stainless steel wetted surfaces
- Dry steam via an internal separator
- Supports validation with material and surface documentation
- Suitable for sterilizers, SIP and clean-area humidification
Selection and sizing
Size on the peak clean steam demand in kg/h, the pressure required at the point of use and the water quality available. Confirm the primary heat source (plant steam pressure or electric), the required documentation for validation, and any surface finish or sanitary connection standard.
Installation and maintenance
Install with the clean steam outlet piped in stainless, adequately drained and vented, and with the primary condensate trapped properly. Arrange sampling points for steam quality testing and keep the unit accessible for inspection and passivation.
Options and spare parts
Level controls, gaskets, separator elements and heating bundles are available; validation documentation can be supplied.