The M10S is a screwed ball valve for steam, water and compressed air. A quarter turn takes it from fully open to fully closed, with a floating ball against PTFE seats giving bubble-tight shut-off in both directions.
It is the general-purpose isolation valve for small bore lines: instrument connections, drain and vent points, small equipment isolation, and compressed air branches where a fast, obvious open-or-closed position matters.
Design and construction
Forged or cast body with a floating stainless steel ball, PTFE or reinforced PTFE seats, and a lever handle showing the valve position at a glance. Full bore versions minimise pressure loss; reduced bore versions are more compact.
Key features
- Quarter-turn operation with visible position
- Bubble-tight shut-off in both directions
- Full bore option for minimum pressure loss
- Suitable for steam, water, air and oil
- Compact body, low cost, easy to automate
- PTFE seats for low operating torque
Selection and sizing
Confirm the medium and temperature: standard PTFE seats suit saturated steam within their temperature limit, but for high temperature or high cycling steam duties a metal-seated or bellows valve is a better choice. State the port size, bore (full or reduced) and whether an actuator is to be fitted.
Installation and maintenance
Install in any orientation with the handle clear of obstructions. Ball valves are for isolation, not throttling – a partly open ball valve erodes its seats. On steam, mount so condensate cannot collect in the ball cavity, and operate the valve periodically to keep it free.
Options and spare parts
Seats, balls, stem seals and handles are available as spares.