The CA44 / CA44S is a drain trap for air and gas systems. It removes the condensate that collects in receivers, separators, drips and gas mains, and closes tight once the liquid has gone so that neither air nor gas escapes to atmosphere.
On gas lines the requirement is stricter than on air: any leak is a safety issue as well as a cost. A trap that closes properly is the difference between a drained system and a fugitive emission.
Design and construction
Body with a float or level-sensing element operating a discharge valve, and a strainer to keep debris off the seat. The CA44 and CA44S variants cover different connection arrangements and capacities for receiver and line installation.
Key features
- Automatic removal of condensate from air and gas systems
- Tight closure – no continuous gas or air loss
- Suitable for receivers, separators and gas mains
- Strainer protects the seating area
- Manual test facility for verification
- Robust construction for plant environments
Selection and sizing
Confirm the gas, the maximum pressure and the condensate volume, and check the material compatibility for corrosive or wet CO2 and hydrocarbon gases. On flammable gas, verify the area classification and specify the correct variant.
Installation and maintenance
Install at the low point of the receiver or separator with the discharge piped to a safe location – never to open drain on hydrocarbon gas. Fit a strainer upstream and test the trap regularly.
Options and spare parts
Valve seats, float assemblies, strainers and gaskets are available.