The DBB3 is a double block and bleed valve: two isolation seats in series with a bleed port between them, all in one body. Closing both seats and opening the bleed proves that the isolation is tight before anyone opens the line – which is the requirement behind most permit-to-work systems on steam and process plant.
Because the three functions share one body, it replaces three separate valves and the associated pipework, shortening the installation and removing joints that could leak.
Design and construction
Bellows sealed double-seat body with two independent plugs on one or two stems and a bleed port between the seats. Both seats are gland-free, so the valve does not leak at the stem while providing verified isolation.
Key features
- Two isolation seats plus bleed in a single body
- Verified isolation for permit-to-work systems
- Bellows sealed – no stem leakage
- Fewer joints and less pipework than three separate valves
- Compact installation for tight plant rooms
- Suitable for steam, condensate and process fluids
Selection and sizing
Select on line size and the pressure class of the system, and confirm the bleed port size and where the bleed will discharge. Double block and bleed is an isolation device – it is not intended for throttling or for continuous regulation.
Installation and maintenance
Install with flow in the direction of the arrow and pipe the bleed to a safe, visible discharge point. Operate in the correct sequence: close both block valves, then open the bleed and confirm no flow before opening the line.
Options and spare parts
Bellows assemblies, seats, plugs and bleed valve parts are available.