The BSA2T is a bellows sealed stop valve for the mid-range of steam and condensate line sizes. It shares the gland-free construction of the BSA range: a welded stainless steel bellows contains the fluid, so there is no stem leak and no packing to renew.
Use it where a larger isolation valve must be operated regularly – at the inlet to a bank of traps, on a separator, or ahead of a control valve that needs frequent isolation for maintenance.
Design and construction
Body with a stainless steel bellows element, a lapped plug and seat and a rising stem with position indication. The larger body carries a correspondingly larger bellows so stroke and life remain adequate at the higher flow capacity.
Key features
- Gland-free bellows construction – zero stem emission
- Tight shut-off at larger line sizes
- Rising stem position indicator
- Stainless steel bellows for saturated steam
- Back-up secondary seal
- Suitable for steam, condensate and hot water
Selection and sizing
Choose BSA2T where the line size and flow exceed the BSA1T range but the pressure class remains at PN16 level. Confirm the connection standard required by the pipe class and whether the installation needs a rising or non-rising stem.
Installation and maintenance
Mount with flow in the direction of the arrow and leave clearance for the rising stem. Isolate and depressurise before servicing the bellows, and check the tell-tale port periodically for leakage past the bellows.
Options and spare parts
Bellows assemblies, seats, plugs and gaskets are available.