The SV604 is a carbon steel safety relief valve for steam, air and non-corrosive process duties. It is the last line of defence on a pressure vessel, boiler or steam main: when pressure reaches the set point, the valve lifts and discharges until pressure falls back, protecting the vessel from over-pressure.
Carbon steel construction suits higher pressure and temperature service than bronze safety valves, and the closed bonnet keeps the spring and guiding mechanism away from the process fluid.
Design and construction
Full-lift or high-lift bonnet-type safety valve with an inlet seat, a lapped disc and a spring loaded through a spindle. Set pressure is adjusted on a test bench and locked; a lever or test gag can be supplied for periodic lifting checks. Outlet connections are sized for the discharge capacity.
Key features
- Carbon steel body for high pressure and temperature steam
- Set pressure certified and locked at the factory
- Closed bonnet protects the spring from the process fluid
- Full-lift or high-lift discharge capacity
- Lever or test gag for in-service lifting checks
- Replaceable disc and seat for reconditioning
Selection and sizing
Select the orifice on the required discharge capacity at the set pressure, not on line size. Confirm the set pressure, the allowable accumulation, the back pressure on the outlet and the required certification (ASME, EN ISO 4126 or PED). State the medium, design pressure, capacity in kg/h and connection standard when requesting a quotation.
Installation and maintenance
Mount the valve vertically with the inlet directly on the vessel or on a short, full-bore connection – never downstream of a shut-off valve. Pipe the outlet to a safe discharge point, support the discharge pipework so it does not load the valve, and arrange for periodic lifting tests as the plant’s inspection regime requires.
Options and spare parts
Discs, seats, springs and gaskets are available; reconditioning should be followed by a bench set-pressure test.