BRV2S ductile iron direct acting pressure reducing valve for steam and compressed air

BRV2S Ductile Iron Pressure Reducing Valve

Ductile iron pressure reducing valve for steam and compressed air - simple, self-acting, no pilot line

The BRV2S is a direct acting pressure reducing valve in ductile iron, for steam and compressed air. A spring acts on a diaphragm that senses downstream pressure and moves the valve plug directly, so there is no pilot line to install and no external sensing pipework to maintain.

It suits smaller duties and point-of-use reduction: a single machine, a small heater battery, a tracing line or a compressed air branch where a pilot operated valve would be unnecessary.

Design and construction

Ductile iron body with a diaphragm actuator, an adjusting screw and a lapped plug and seat. Because the diaphragm acts directly on the plug, response is simple and robust, and the valve is easy to strip for cleaning.

Key features

  • Self-acting – no pilot line or external sensing pipe
  • Ductile iron body for steam and compressed air
  • Compact and inexpensive for point-of-use reduction
  • Adjustable set pressure with a locking screw
  • Simple maintenance with few wearing parts
  • Good shut-off at low demand

Selection and sizing

Direct acting valves have a wider proportional band than pilot operated ones, so downstream pressure droops as flow rises. Use the BRV2S where the flow is steady and the accuracy requirement is modest; for critical pressure control use the pilot operated 25P or GP-2000. Confirm inlet pressure, outlet pressure and maximum flow.

Installation and maintenance

Install with a strainer upstream and gauges either side, and allow a straight run before the valve. On steam, trap the upstream line so the valve does not see wet steam, and fit a safety valve downstream if equipment rating demands it.

Options and spare parts

Diaphragms, plugs, seats and springs are available as spares.

Request a Quote

Technical Specifications

Standard configurations. Custom materials, connections and special testing available on request.

ParameterSpecification
Product type Direct acting pressure reducing valve
Size range DN15 - DN50 (1/2" - 2")
Connections Screwed BSP/NPT; flanged EN 1092 PN16
Body material Ductile iron
Max inlet pressure 16 bar g
Downstream range Adjustable, typically 0.3 - 10 bar g
Media Steam, compressed air
Documentation EN 10204 3.1 material certificate

Typical Applications

Steam & Fluid Control

Modulating control valves, actuators and positioners for accurate process control loops.

Pressure Management

Pressure reducing and safety relief valves protecting steam and compressed air systems.

Plant Automation

Electric and pneumatic actuation for remote and hazardous-area valve operation.

Related Control Systems

Compare more products in the same range.

Get BRV2S Ductile Iron Pressure Reducing Valve Pricing Today

Send us your size, class and material requirements - quotation within 24 hours.

Request a Quote