How to Select a Gate Valve

November 11, 2026

Size, pressure class, material and end connection decide whether a gate valve will last the life of the plant or fail in the first year.

1. Size and bore

Size the valve on the line size, not on the pump discharge. Full bore keeps pressure drop close to a straight pipe; reduced bore is cheaper but adds turbulence.

2. Pressure class

ASME Class 150 covers most utility steam lines; Class 600 and above is normal for high pressure gas. Always check the class against design pressure at design temperature, not at ambient.

3. Body material

WCB carbon steel handles steam and non-corrosive hydrocarbons to 425°C. Above that use WC6 or WC9 chrome-moly. For acids and chlorides switch to CF8M or duplex 2205.

4. Trim and testing

13Cr trim is standard; Stellite facing is worth the small extra cost on throttling or dirty service. Ask for API 598 shell and seat test reports with every shipment.

Ask an engineer