CA44 and CA44S air and gas drain trap for receivers, separators and gas lines

CA44 / CA44S Air & Gas Drain Trap

Air and gas drain trap - removes condensate from receivers, separators and gas mains

The CA44 / CA44S is a drain trap for air and gas systems. It removes the condensate that collects in receivers, separators, drips and gas mains, and closes tight once the liquid has gone so that neither air nor gas escapes to atmosphere.

On gas lines the requirement is stricter than on air: any leak is a safety issue as well as a cost. A trap that closes properly is the difference between a drained system and a fugitive emission.

Design and construction

Body with a float or level-sensing element operating a discharge valve, and a strainer to keep debris off the seat. The CA44 and CA44S variants cover different connection arrangements and capacities for receiver and line installation.

Key features

  • Automatic removal of condensate from air and gas systems
  • Tight closure – no continuous gas or air loss
  • Suitable for receivers, separators and gas mains
  • Strainer protects the seating area
  • Manual test facility for verification
  • Robust construction for plant environments

Selection and sizing

Confirm the gas, the maximum pressure and the condensate volume, and check the material compatibility for corrosive or wet CO2 and hydrocarbon gases. On flammable gas, verify the area classification and specify the correct variant.

Installation and maintenance

Install at the low point of the receiver or separator with the discharge piped to a safe location – never to open drain on hydrocarbon gas. Fit a strainer upstream and test the trap regularly.

Options and spare parts

Valve seats, float assemblies, strainers and gaskets are available.

Request a Quote

Technical Specifications

Standard configurations. Custom materials, connections and special testing available on request.

ParameterSpecification
Product type Air and gas drain trap
Size range DN15 - DN50 (1/2" - 2")
Connections Screwed or flanged
Body material Cast iron / steel / stainless steel
Max working pressure 16 bar g (model dependent)
Media Compressed air, process gases, gas mains
Operation Automatic level operated
Documentation Material certificate on request

Typical Applications

Compressed Air Systems

Automatic drain traps removing condensate to protect air tools and instrumentation.

Humidification

Steam humidification products for HVAC and process air quality.

Related Compressed Air & Humidification

Compare more products in the same range.

Get CA44 / CA44S Air & Gas Drain Trap Pricing Today

Send us your size, class and material requirements - quotation within 24 hours.

Request a Quote