The Airodyn is an automatic drain trap for compressed air systems. It discharges the water and oil that collect in receivers, aftercoolers, filters and dryers, and it closes tight when the condensate has gone – so it does not bleed compressed air to drain.
Condensate left in a compressed air system travels downstream as a mist, corrodes pipework, damages tools and instruments and ruins product in packaging, spraying and instrumentation duties. A trap that leaks air is nearly as bad: a 3 mm bleed on a 7 bar system can cost more than the compressor’s annual maintenance.
Design and construction
Float or level-sensing mechanism in a bowl or body, with a valve that opens on rising level and closes when the condensate is drained. Some versions include a manual test lever and a strainer to keep dirt out of the seat.
Key features
- Automatic condensate removal – no manual draining
- Closes tight when drained – no continuous air loss
- Handles oil/water emulsion from lubricated compressors
- Suitable for receivers, filters, dryers and separators
- Manual test facility for checking operation
- Compact body for point-of-use installation
Selection and sizing
Select on the condensate volume and the receiver or filter size, and on the maximum working pressure of the air system. For oil-flooded compressors, choose a version that handles emulsion rather than a plain water trap. Confirm whether a manual or automatic test facility is required.
Installation and maintenance
Fit at the lowest point of the receiver, filter or dryer, with a strainer upstream and the discharge piped to an oil/water separator rather than to open drain. Keep the trap accessible for testing, and check it monthly – condensate traps are forgotten until the air system fails.
Options and spare parts
Valve seats, float assemblies and strainers are available as spares.