The IN25M is a larger steam injector for tanks, process vessels and pipelines with a higher heat demand than the IN15 can serve. It works on the same principle: steam is injected and condenses in the liquid, transferring latent heat directly with almost no loss.
It suits bulk heating of process water, CIP and wash water, and large mixing vessels where an indirect heat exchanger would be expensive to install and prone to fouling.
Design and construction
Stainless steel injector with a multi-nozzle head sized for the higher steam flow, mounted in the vessel wall or pipeline. Steam admission is controlled upstream; the injector has no moving parts and needs no maintenance beyond occasional inspection.
Key features
- High heat input in a compact injector
- Silent operation at the design steam pressure
- Direct heat transfer – no exchanger surface to foul
- Agitates the liquid while heating
- Stainless steel construction for process liquids
- No moving parts, minimal maintenance
Selection and sizing
Size on the required heat input in kW, the steam pressure available at the injector and the liquid head at the injection point. Confirm that the added condensate is acceptable in the process, and check the vessel’s venting capacity – air must be able to leave as steam enters.
Installation and maintenance
Mount below the working liquid level, with the steam line trapped and fitted with a non-return valve. Provide a vent on the vessel and control the steam with a valve or controller responsive to the liquid temperature.
Options and spare parts
Nozzle heads and gaskets are available as spares.