The IN15 is a steam injector that heats liquid by injecting steam directly into it. Steam enters through a series of nozzles and condenses in the liquid, transferring its latent heat almost completely – efficiency close to 100 percent, with agitation as a bonus.
Direct injection is the fastest and most efficient way to heat water or a process liquid: no heat exchanger surface, no fouling, no condensate to recover and no approach temperature. It is used on tanks, mixing vessels, pipelines and washdown systems.
Design and construction
Stainless steel injector head with a nozzle arrangement that produces silent condensation, mounted in a pipe or tank wall. Steam supply is controlled by a valve upstream, and the injector itself has no moving parts.
Key features
- Nearly 100 percent of steam heat transferred to the liquid
- Silent operation – no steam hammer or noise
- No moving parts and no heat transfer surface to foul
- Provides agitation as well as heating
- Fast heat-up compared with indirect heating
- Compact stainless steel construction
Selection and sizing
Size on the heat input required and the steam pressure available: the injector needs enough pressure to overcome the liquid head at the injection point. Confirm the liquid, its temperature limit and whether the added condensate volume is acceptable – direct injection adds water to the process.
Installation and maintenance
Mount the injector below the minimum liquid level, in the tank wall or in the pipeline, with the steam supply controlled by a valve or a controller. Ensure the liquid always covers the injector before steam is admitted, and provide a non-return valve on the steam line.
Options and spare parts
Injector nozzle assemblies and body gaskets are available.