The S3 is the flanged cast iron separator for utility steam mains. It provides the same dry-steam benefit as the ductile iron range at lower cost, for plants running clean saturated steam within the cast iron rating.
It is commonly installed ahead of reducing valves, on the inlet to a process block, or at the end of a main where condensate accumulates.
Design and construction
Cast iron body with flanged connections to EN 1092 PN16, a cyclone element and a bottom drain connection for a trap.
Key features
- Flanged EN 1092 PN16 connections
- Economical cast iron construction
- Removes entrained condensate and dirt from mains
- Protects downstream valves and traps
- Low pressure loss
- Bottom drain for a trap or drain valve
Selection and sizing
Confirm the steam pressure and temperature stay within the cast iron rating. For higher ratings use S13 ductile iron. Size on velocity, and provide a trap on the drain.
Installation and maintenance
Install vertically, inlet in the direction of the arrow, with a trap at the drain. Leave a straight run upstream and insulate the body.
Options and spare parts
Cyclone inserts and gaskets are available.