LCV3 lift check valve for steam, condensate and water non-return service

LCV3 Lift Check Valve

Lift check valve - robust non-return protection with guided disc and low pressure loss

The LCV3 is a lift check valve: a guided disc lifts off its seat with forward flow and drops back on reverse flow, closing the line to backflow. The guided disc keeps the seat alignment accurate through many cycles, which is what a check valve needs to stay tight.

It is used on steam and condensate lines where a non-return function is required at a header, at a pump discharge, or downstream of a trap discharging into a common return main.

Design and construction

Body with a guided disc and seat, sized so that the disc lifts clear at normal flow and closes quickly when flow stops. The guided design avoids the misalignment that wears out simple swing checks on pulsating service.

Key features

  • Guided disc for accurate seating over repeated cycles
  • Tight closure on reverse flow
  • Low pressure loss at design flow
  • Suitable for steam, condensate and water
  • Simple maintenance with replaceable disc and seat
  • Robust body for plant utility service

Selection and sizing

Size on line size and check the velocity at normal flow: too large and the disc will chatter, too small and the pressure loss becomes significant. For pulsating flows, confirm the valve can close between pulses.

Installation and maintenance

Install with flow in the direction of the arrow, preferably with vertical up-flow for reliable gravity closure, and keep a straight run upstream. Do not install a check valve where it would trap condensate.

Options and spare parts

Discs, seats and gaskets are available.

Request a Quote

Technical Specifications

Standard configurations. Custom materials, connections and special testing available on request.

ParameterSpecification
Product type Lift check valve
Size range DN15 - DN50 (1/2" - 2")
Connections Screwed BSP/NPT or flanged EN 1092 PN16
Body material Cast iron / brass / stainless steel (model dependent)
Max operating pressure (PMA) 16 bar g
Max operating temperature (TMA) 250 °C
Disc Guided, replaceable
Testing Shell and seat test to EN 12266
Documentation EN 10204 3.1 material certificate

Typical Applications

Steam & Process Isolation

Bellows sealed stop valves, ball valves and check valves for tight, maintenance-free isolation.

Steam Quality

Separators, strainers, air vents and vacuum breakers protecting plant and improving steam quality.

Utilities & Water

Pipeline ancillaries for compressed air, water and general industrial service.

Related Pipeline Ancillaries

Compare more products in the same range.

Get LCV3 Lift Check Valve Pricing Today

Send us your size, class and material requirements - quotation within 24 hours.

Request a Quote