DCV3 wafer disc check valve for steam and condensate non-return duty

DCV3 Disc Check Valve

Wafer disc check valve - compact non-return protection for steam, condensate and water lines

The DCV3 is a wafer-type disc check valve. A lightweight disc lifts off its seat with forward flow and closes as soon as flow stops or reverses, preventing backflow into a steam main, a condensate header or a pump discharge.

Its short face-to-face length and light disc make it the practical choice where space is limited and where a low cracking pressure is needed – trap discharges into a common return, pump outlets, and branch lines off a header.

Design and construction

Wafer body clamped between flanges, with a single disc and a short travel so that closure is quick and pressure loss stays low. There are no levers or springs in the basic version, so there is little to wear and nothing to maintain.

Key features

  • Compact wafer design – very short face-to-face
  • Low cracking pressure and low pressure loss
  • Quick closure to limit reverse flow and water hammer
  • Simple construction with few wearing parts
  • Suitable for steam, condensate, water and air
  • Clamped between flanges, no separate gaskets in most sizes

Selection and sizing

Size on line size with attention to velocity: an oversized check valve can chatter, an undersized one adds pressure loss. Confirm the medium, pressure class and whether the installation needs a spring-assisted closure for vertical up-flow.

Installation and maintenance

Install with the flow arrow in the direction of flow, and leave enough straight pipe upstream for the flow to settle. For vertical flow, confirm the valve closes against gravity – a spring-assisted type may be required.

Options and spare parts

Replacement discs and seats are available; the body is normally retained.

Request a Quote

Technical Specifications

Standard configurations. Custom materials, connections and special testing available on request.

ParameterSpecification
Product type Wafer disc check valve
Size range DN15 - DN50 (1/2" - 2")
Connections Wafer, clamped between flanges EN 1092 PN16
Body material Stainless steel / carbon steel
Max operating pressure (PMA) 16 bar g
Max operating temperature (TMA) 250 °C
Disc Stainless steel, low cracking pressure
Testing Shell and seat test to EN 12266
Documentation EN 10204 3.1 material certificate

Typical Applications

Steam & Process Isolation

Bellows sealed stop valves, ball valves and check valves for tight, maintenance-free isolation.

Steam Quality

Separators, strainers, air vents and vacuum breakers protecting plant and improving steam quality.

Utilities & Water

Pipeline ancillaries for compressed air, water and general industrial service.

Related Pipeline Ancillaries

Compare more products in the same range.

Get DCV3 Disc Check Valve Pricing Today

Send us your size, class and material requirements - quotation within 24 hours.

Request a Quote