DBB3 double block and bleed bellows sealed valve for safe isolation of steam lines

DBB3 Double Block & Bleed Bellows Sealed Stop Valve

Double block and bleed valve - two isolation seats plus a bleed, in one body

The DBB3 is a double block and bleed valve: two isolation seats in series with a bleed port between them, all in one body. Closing both seats and opening the bleed proves that the isolation is tight before anyone opens the line – which is the requirement behind most permit-to-work systems on steam and process plant.

Because the three functions share one body, it replaces three separate valves and the associated pipework, shortening the installation and removing joints that could leak.

Design and construction

Bellows sealed double-seat body with two independent plugs on one or two stems and a bleed port between the seats. Both seats are gland-free, so the valve does not leak at the stem while providing verified isolation.

Key features

  • Two isolation seats plus bleed in a single body
  • Verified isolation for permit-to-work systems
  • Bellows sealed – no stem leakage
  • Fewer joints and less pipework than three separate valves
  • Compact installation for tight plant rooms
  • Suitable for steam, condensate and process fluids

Selection and sizing

Select on line size and the pressure class of the system, and confirm the bleed port size and where the bleed will discharge. Double block and bleed is an isolation device – it is not intended for throttling or for continuous regulation.

Installation and maintenance

Install with flow in the direction of the arrow and pipe the bleed to a safe, visible discharge point. Operate in the correct sequence: close both block valves, then open the bleed and confirm no flow before opening the line.

Options and spare parts

Bellows assemblies, seats, plugs and bleed valve parts are available.

Request a Quote

Technical Specifications

Standard configurations. Custom materials, connections and special testing available on request.

ParameterSpecification
Product type Double block and bleed bellows sealed valve
Size range DN15 - DN50 (1/2" - 2")
Connections Screwed BSP/NPT or flanged EN 1092 PN16
Body material Cast iron / ductile iron
Max operating pressure (PMA) 16 bar g
Max operating temperature (TMA) 250 °C
Configuration Two isolation seats + bleed port
Testing Shell and seat test to EN 12266
Documentation EN 10204 3.1 material certificate

Typical Applications

Steam & Process Isolation

Bellows sealed stop valves, ball valves and check valves for tight, maintenance-free isolation.

Steam Quality

Separators, strainers, air vents and vacuum breakers protecting plant and improving steam quality.

Utilities & Water

Pipeline ancillaries for compressed air, water and general industrial service.

Related Pipeline Ancillaries

Compare more products in the same range.

Get DBB3 Double Block & Bleed Bellows Sealed Stop Valve Pricing Today

Send us your size, class and material requirements - quotation within 24 hours.

Request a Quote