The BSA6T is the extended-life version of the bellows sealed stop valve range. It is specified where a valve is cycled frequently – isolation at every shift, on batch plant, or ahead of equipment that is opened regularly – and where bellows fatigue would otherwise shorten the valve’s life.
The construction is the same gland-free principle, with a heavier bellows and improved guiding so that repeated stroking does not wear the element prematurely.
Design and construction
Heavier multi-ply bellows, hardened stem guide and a lapped seat, built to take repeated full-stroke cycling without loss of seal integrity. The stem is guided over the full travel to keep the plug concentric with the seat.
Key features
- Extended bellows life under frequent cycling
- Gland-free operation with zero stem emission
- Hardened guide for repeatable plug alignment
- Tight shut-off maintained over the valve’s life
- Suitable for batch plant and frequent isolation duty
- Lower whole-life cost where valves are operated daily
Selection and sizing
Choose BSA6T over the standard BSA range where the valve will be stroked more than a few times a week, or where a bellows failure would interrupt production. Confirm size, pressure class and temperature as for the standard valves.
Installation and maintenance
As for the standard bellows valves: flow in the direction of the arrow, access for the handwheel, and isolation before servicing. Record the installation date so the bellows life can be tracked against the maintenance plan.
Options and spare parts
Replacement bellows assemblies, seats, plugs and gaskets are available.