BSA3T bellows sealed stop valve for steam, air and process fluid isolation

BSA3T Bellows Sealed Stop Valve

Bellows sealed stop valve for steam, compressed air and process fluids

The BSA3T is a bellows sealed stop valve for steam, compressed air and general process fluids. The bellows contains the fluid at the stem, so the valve can be used on lines where a packed gland would leak, seize or require routine attention.

It is a common choice on utility isolation points where the medium changes between steam, air and water, and where one valve standard is preferred across the plant.

Design and construction

Body with a stainless steel bellows, lapped seat and plug, and a stem guided to keep the plug centred through repeated cycling. The bellows is welded at both ends so that the only seal in the valve is metal.

Key features

  • Gland-free – suitable for steam, air and process fluids
  • Tight closure with a lapped seat
  • Repeatable operation over many cycles
  • Stainless steel bellows and trim
  • Back-up secondary seal
  • Simple maintenance – the bellows is the only wearing seal

Selection and sizing

Confirm the medium: bellows valves suit clean fluids, and are not recommended for slurries or fluids that can crystallise in the bellows convolutions. State the pressure class and connection standard for the pipe class.

Installation and maintenance

Install in the direction of flow with access to the handwheel. Do not throttle with the valve; use it for isolation only. On air service, check for internal leakage at the seat after commissioning.

Options and spare parts

Bellows assemblies, plugs, seats and gaskets are available.

Request a Quote

Technical Specifications

Standard configurations. Custom materials, connections and special testing available on request.

ParameterSpecification
Product type Bellows sealed stop valve
Size range DN15 - DN50 (1/2" - 2")
Connections Screwed BSP/NPT or flanged EN 1092 PN16
Body material Cast iron / ductile iron
Max operating pressure (PMA) 16 bar g
Max operating temperature (TMA) 250 °C
Media Steam, compressed air, water, process fluids
Testing Shell and seat test to EN 12266
Documentation EN 10204 3.1 material certificate

Typical Applications

Steam & Process Isolation

Bellows sealed stop valves, ball valves and check valves for tight, maintenance-free isolation.

Steam Quality

Separators, strainers, air vents and vacuum breakers protecting plant and improving steam quality.

Utilities & Water

Pipeline ancillaries for compressed air, water and general industrial service.

Related Pipeline Ancillaries

Compare more products in the same range.

Get BSA3T Bellows Sealed Stop Valve Pricing Today

Send us your size, class and material requirements - quotation within 24 hours.

Request a Quote