The ISP5 is an intrinsically safe electro-pneumatic positioner for control valves in hazardous areas. The electrical circuit is energy-limited so that no spark or hot surface can ignite a flammable atmosphere, which allows the positioner to be installed directly in Zone 1 and Zone 2 gas areas without a flameproof enclosure.
It is the standard choice in refineries, chemical plants, gas terminals and any plant handling flammable solvents, where a control valve must be positioned accurately but the area classification rules out ordinary instrument housings.
Design and construction
Stainless steel or coated housing with an encapsulated, energy-limited input circuit, a pneumatic pilot stage and a non-contact or potentiometer feedback from the valve stem. Certified to ATEX and IECEx for gas and dust, and supplied with the certificate and control drawing needed for the installation.
Key features
- ATEX and IECEx certified intrinsically safe design
- 4-20 mA input, accurate stem positioning
- Suitable for Zone 0/1/2 gas and dust atmospheres
- Stainless steel housing for corrosive plant environments
- Direct or reverse action and split range
- Certificate and control drawing supplied with the unit
Selection and sizing
Confirm the area classification, gas group and temperature class before ordering, and check that the barrier or isolator in the control system matches the positioner’s entity parameters. State the actuator model and supply air pressure, and whether the loop requires split range or reverse action.
Installation and maintenance
Install through an appropriate galvanic isolator or barrier, follow the control drawing exactly, and earth the housing as specified. Use clean, dry instrument air, and calibrate the stroke after mounting.
Options and spare parts
Certified pilot assemblies, feedback modules and filter regulators are available; certification documents accompany every unit.