The FR20A is a filter regulator for compressed air lines feeding instruments and valve actuators. It removes dirt and condensed water from the air and holds a steady downstream pressure, which is what positioners and pneumatic actuators need to repeat their stroke accurately.
Most positioner failures trace back to wet or dirty air rather than to the positioner itself. A filter regulator at the point of use is the cheapest reliability improvement available on a pneumatic control loop.
Design and construction
Sintered or porous filter element in a bowl with a manual drain, followed by a diaphragm reducing valve with an adjusting knob and a pressure gauge port. The bowl can be metal or polycarbonate depending on the environment.
Key features
- Removes dirt and condensate from instrument air
- Stable regulated outlet pressure
- Adjustable outlet with gauge connection
- Manual drain for easy servicing
- Compact body for point-of-use installation
- Protects positioners and actuators from contamination
Selection and sizing
Select the regulator on the air flow required by the actuator or positioner, the inlet pressure available and the outlet pressure the instrument needs – typically 1.4 to 4 bar for positioners. Confirm the port size and whether a metal bowl is required for a washdown or outdoor location.
Installation and maintenance
Fit the regulator upstream of the positioner or actuator, as close as practical, with the drain accessible. Install with the flow arrow in the direction of flow, and check the bowl is drained regularly in humid conditions.
Options and spare parts
Filter elements, bowls, diaphragms and gauges are available as spares.