The EL4613 is an electric actuator with a spring-return fail-safe mechanism. On loss of power the stored spring energy drives the valve to its defined safe position – closed for a steam supply valve, open for a cooling water valve – without waiting for an operator.
It is specified where an electric actuator is preferred for accuracy or for want of instrument air, but the loop still needs a defined failure mode: burner steam supplies, reactor jackets, sterilizers and remote unattended plant.
Design and construction
Motor and gearbox with a pre-loaded spring pack and an electromagnetic clutch that releases on power loss. The electronic board provides 4-20 mA positioning and a fail-safe status signal to the control system.
Key features
- Spring-return fail-safe on power loss
- 4-20 mA modulating control with position feedback
- Fail-safe direction selectable at ordering
- Status output for the control system
- Sealed housing for outdoor installation
- Manual override for maintenance
Selection and sizing
Confirm the required fail-safe direction and the thrust available from the spring at the valve’s differential pressure. The spring must be able to move the valve against the worst-case unbalance. Specify supply voltage, control signal and any requirement for a battery backup instead of a spring.
Installation and maintenance
Mount vertically, check the fail-safe stroke by isolating power before commissioning, and verify that the spring drives the valve fully to the safe position. Wire the status output to the control system so a failure is annunciated.
Options and spare parts
Spring packs, positioner boards, motors and clutches are available as spares.