The BVA300 is a spring-return pneumatic diaphragm actuator for globe control valves. Instrument air acts on the diaphragm against a spring; when the air signal falls, the spring drives the valve to its safe position. That fail-safe behaviour is why pneumatic actuation remains the default for steam and process control loops.
The actuator accepts a positioner, an I/P converter or a simple solenoid, and can be supplied air-to-open or air-to-close to suit the plant’s safe-state requirement.
Design and construction
Fabric-reinforced diaphragm in a cast aluminium or steel housing, with a coiled spring and a stem that couples directly to the valve. The stroke is adjustable and the direction of action is set by the spring and air arrangement rather than by the valve body.
Key features
- Fail-safe spring return on loss of air signal
- Air-to-open or air-to-close configuration
- Direct mounting on KE73 and compatible globe valves
- Positioner, I/P and solenoid accessories
- Adjustable stroke and stroke indication
- Robust diaphragm with a long cycling life
Selection and sizing
Select the actuator on the thrust required to seat the valve against the maximum differential pressure, plus a margin for packing friction and unbalance. Specify the air supply pressure available on site, the fail-safe direction and whether a positioner is required. Under-sizing the actuator is the usual reason a control valve will not close tightly at full pressure.
Installation and maintenance
Mount the actuator vertically above the valve, connect instrument air through a filter regulator and keep the air line dry. Check the fail-safe direction by dropping the air signal before commissioning, and set the stroke limits with the valve in the line.
Options and spare parts
Diaphragms, springs, stem seals and positioner mounting kits are available as spares.