The BTD52L thermodynamic steam trap is a disc-type trap with an integral strainer. A single moving disc opens and closes on the velocity of the fluid passing through it, so the trap discharges condensate at close to steam temperature and closes tight on live steam.
Because it is small, light and unaffected by freezing, it is the standard choice for steam mains, tracing lines, outdoor pipework and any location where space is limited or where a trap must survive frost. It also tolerates water hammer and vibration better than most mechanical traps.
Design and construction
Stainless steel body and disc with an integral strainer screen protecting the seating area. There are no levers, floats or pivots – the disc is the only moving part – which is why the trap keeps working after years of cycling and why maintenance is limited to cleaning or replacing the disc.
Key features
- Single moving part – the disc – for high reliability
- Integral strainer protects the seat from dirt and scale
- Discharges condensate close to steam temperature
- Freeze-proof: no water body to burst in cold weather
- Compact and light – ideal for tracing lines and lagged mains
- Tolerates water hammer, vibration and superheat
Selection and sizing
Thermodynamic traps are best on mains, tracing, and duties where the condensate load is modest and the pressure is reasonably steady. They are not the first choice for large condensate loads or where back pressure is high relative to inlet pressure. Size on line size for mains, and on load for equipment duties. Confirm the maximum back pressure ratio before applying to a lifted return.
Installation and maintenance
Install horizontally with the inlet at the top, or vertically downwards, following the trap’s preferred orientation. Keep a strainer upstream if the integral screen is not specified for the duty, and fit a sight glass to verify discharge. Thermodynamic traps cycle by nature – a short blow then a pause is normal, not a fault.
Options and spare parts
Replacement discs and strainer screens are the only routine spares. Supply the trap size and marking when ordering.