The FT43 is a cast iron ball float steam trap for steam distribution mains, drip legs, tracing lines and general process equipment. It discharges condensate continuously and proportionally to the load, which is what keeps a steam main dry and a heat exchanger at full rating.
Cast iron construction makes it the economical choice for plant utility steam up to about 13 bar g where the condensate is clean and the duty is steady. It is the trap most often specified as a like-for-like replacement on existing FT43 and FT14 installations.
Design and construction
Cast iron body with bolted cover, float-operated lever mechanism and a replaceable discharge seat. The float chamber is arranged so that dirt and scale settle away from the orifice, and the cover can be removed for cleaning without disturbing the pipework.
Key features
- Continuous condensate discharge at steam temperature
- Cast iron body – economical choice for utility steam mains
- Bolted cover for cleaning and orifice inspection
- Modulating discharge copes with wide load swings
- Replaceable seat and valve plug keep the body in service for decades
- Available with screwed or flanged connections
Selection and sizing
Use the FT43 on clean condensate duties up to 13 bar g. For higher pressure, higher temperature or dirty condensate, move to the carbon steel FT44 or a thermodynamic trap. Size on the condensate load and the minimum differential pressure; for steam mains allow for the condensate picked up at start-up, which can be several times the running load.
Installation and maintenance
Fit the trap at the low point of the main or at the end of a drip leg, with a strainer and a sight glass. Do not lift condensate directly into a return main without checking the back pressure – if the lift exceeds the available differential, use a pump trap. The trap must be able to drain fully; a partially flooded chamber will hold the float up and pass steam.
Options and spare parts
Seats, valve plugs, float and lever assemblies and cover gaskets are available as spares for all sizes.